The correct way to install the cantilever Materials platform

[Summary description]

 With the rapid development of science and technology, there are more and more high-rise buildings in many areas, so there are more places that need to be applied to the cantilever materials platform. However, no matter what kind of equipment, if you are not careful during the installation process, there may be certain safety hazards during the operation. Next, I will briefly introduce the installation of the cantilever materials platform to you. the right way.

With the rapid development of science and technology, there are more and more high-rise buildings in many areas, so there are more places that need to be applied to the cantilever materials platform. However, no matter what kind of equipment, if you are not careful during the installation process, there may be certain safety hazards during the operation. Next, I will briefly introduce the installation of the cantilever materials platform to you. the right way.

Before the cantilever materials platform enters the construction site for assembly, there should be relevant technical personnel to conduct safety technical disclosure work for the operators. After the cantilevered materials platform is assembled, its overall structure should be checked and accepted. Work. If some bad conditions are encountered, such as strong wind and thick fog, the materials platform cannot be installed to avoid accidents, and the operator on the platform cannot exceed two people during use.

If you need a cantilevered materials platform and its related accessories that need to be used for multiple turnovers, you need to check the specific conditions of the structure in advance before installation, and carry out strict inspection when necessary. Welding, corrosion and other conditions need to be inspected after maintenance before they can continue to be used.

The general cantilevered materials platform is composed of a steel wire rope material platform, the corresponding snap-embedded parts and some small components that play a fixed role. During the installation process, technicians must follow the relevant specifications For the design and installation, a construction plan is also required, and the drawings and calculation books should also be reflected in the plan.

After installing the cantilever materials platform, the surrounding environment and platform should be strictly inspected, and corresponding safety protection measures should be taken. After the cantilever materials platform is installed in place, before it is put into use, the quality inspection staff in charge of the project must check the installation of the cantilevered materials platform. until the technical requirements are met. The installation inspection of the materials platform is mainly carried out from the following aspects:

1. Check the anchors after the materials platform. The number of pressure ring steel bars for anchoring the main beam on each side must be 2, and wooden wedges must be used to wedge the gap between the pressure ring steel bars and the main beam to ensure that the main beam is firmly anchored.

2. The materials platform is checked by oblique pulling. There are 2 main beams on each side of the cable-stayed wire rope. The wire rope must be in a state of tension and force. The flower basket bolts must reserve about 125px of active wire to prevent the flower basket bolts from slipping.

3. Check the baffle of the materials platform, the baffle must be close to the structural beam plate

4. The safety protection inspection of the materials platform, the safety protection of the materials platform must be implemented in strict accordance with the relevant specifications, so as to avoid accidents.